SkidSec WebShell

Server Address : 172.31.38.4

Web Server : Apache/2.4.58 (Ubuntu)

Uname : Linux ip-172-31-38-4 6.14.0-1017-aws #17~24.04.1-Ubuntu SMP Wed Nov 5 10:48:17 UTC 2025 x86_64

PHP Version : 7.4.33

## template:jinja ####################################################################### # # This is an example chrony configuration file. You should copy it to # /usr/local/etc/chrony.conf after uncommenting and editing the options that you # want to enable. The more obscure options are not included. Refer # to the documentation for these. # ####################################################################### ### COMMENTS # Any of the following lines are comments (you have a choice of # comment start character): # a comment % a comment ! a comment ; a comment # # Below, the '!' form is used for lines that you might want to # uncomment and edit to make your own chrony.conf file. # ####################################################################### ####################################################################### ### SPECIFY YOUR NTP SERVERS # Most computers using chrony will send measurement requests to one or # more 'NTP servers'. You will probably find that your Internet Service # Provider or company have one or more NTP servers that you can specify. # Failing that, there are a lot of public NTP servers. There is a list # you can access at http://support.ntp.org/bin/view/Servers/WebHome or # you can use servers from the pool.ntp.org project. {%- if servers %}# servers {% endif %} {% for server in servers -%} server {{server}} iburst {% endfor %} # This is a reasonable default setting to have on in typical cases for # a workstation with a full-time internet connection: {% if pools %}# pools {% endif %} {% for pool in pools -%} pool {{pool}} iburst {% endfor %} {% for peer in peers -%} peer {{peer}} {% endfor %} {% for a in allow -%} allow {{a}} {% endfor %} ####################################################################### ### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK # # To avoid changes being made to your computer's gain/loss compensation # when the measurement history is too erratic, you might want to enable # one of the following lines. The first seems good with servers on the # Internet, the second seems OK for a LAN environment. ! maxupdateskew 100 ! maxupdateskew 5 # If you want to increase the minimum number of selectable sources # required to update the system clock in order to make the # synchronisation more reliable, uncomment (and edit) the following # line. ! minsources 2 # If your computer has a good stable clock (e.g. it is not a virtual # machine), you might also want to reduce the maximum assumed drift # (frequency error) of the clock (the value is specified in ppm). ! maxdrift 100 # By default, chronyd allows synchronisation to an unauthenticated NTP # source (i.e. specified without the nts and key options) if it agrees with # a majority of authenticated NTP sources, or if no authenticated source is # specified. If you don't want chronyd to ever synchronise to an # unauthenticated NTP source, uncomment the first from the following lines. # If you don't want to synchronise to an unauthenticated NTP source only # when an authenticated source is specified, uncomment the second line. # If you want chronyd to ignore authentication in the source selection, # uncomment the third line. ! authselectmode require ! authselectmode prefer ! authselectmode ignore ####################################################################### ### FILENAMES ETC # Chrony likes to keep information about your computer's clock in files. # The 'driftfile' stores the computer's clock gain/loss rate in parts # per million. When chronyd starts, the system clock can be tuned # immediately so that it doesn't gain or lose any more time. You # generally want this, so it is uncommented. driftfile /var/db/chrony/drift # If you want to enable NTP authentication with symmetric keys, you will need # to uncomment the following line and edit the file to set up the keys. ! keyfile /usr/local/etc/chrony.keys # If you specify an NTP server with the nts option to enable authentication # with the Network Time Security (NTS) mechanism, or enable server NTS with # the ntsservercert and ntsserverkey directives below, the following line will # allow the client/server to save the NTS keys and cookies in order to reduce # the number of key establishments (NTS-KE sessions). ntsdumpdir /var/db/chrony # If chronyd is configured to act as an NTP server and you want to enable NTS # for its clients, you will need a TLS certificate and private key. Uncomment # and edit the following lines to specify the locations of the certificate and # key. ! ntsservercert /etc/.../foo.example.net.crt ! ntsserverkey /etc/.../foo.example.net.key # chronyd can save the measurement history for the servers to files when # it exits. This is useful in 2 situations: # # 1. If you stop chronyd and restart it with the '-r' option (e.g. after # an upgrade), the old measurements will still be relevant when chronyd # is restarted. This will reduce the time needed to get accurate # gain/loss measurements. # # 2. On Linux, if you use the RTC support and start chronyd with # '-r -s' on bootup, measurements from the last boot will still be # useful (the real time clock is used to 'flywheel' chronyd between # boots). # # Uncomment the following line to use this. ! dumpdir /var/db/chrony # chronyd writes its process ID to a file. If you try to start a second # copy of chronyd, it will detect that the process named in the file is # still running and bail out. If you want to change the path to the PID # file, uncomment this line and edit it. The default path is shown. ! pidfile /var/run/chrony/chronyd.pid # If the system timezone database is kept up to date and includes the # right/UTC timezone, chronyd can use it to determine the current # TAI-UTC offset and when will the next leap second occur. ! leapsectz right/UTC ####################################################################### ### INITIAL CLOCK CORRECTION # This option is useful to quickly correct the clock on start if it's # off by a large amount. The value '1.0' means that if the error is less # than 1 second, it will be gradually removed by speeding up or slowing # down your computer's clock until it is correct. If the error is above # 1 second, an immediate time jump will be applied to correct it. The # value '3' means the step is allowed only in the first three updates of # the clock. Some software can get upset if the system clock jumps # (especially backwards), so be careful! ! makestep 1.0 3 ####################################################################### ### LEAP SECONDS # A leap second is an occasional one-second correction of the UTC # time scale. By default, chronyd tells the kernel to insert/delete # the leap second, which makes a backward/forward step to correct the # clock for it. As with the makestep directive, this jump can upset # some applications. If you prefer chronyd to make a gradual # correction, causing the clock to be off for a longer time, uncomment # the following line. ! leapsecmode slew ####################################################################### ### LOGGING # If you want to log information about the time measurements chronyd has # gathered, you might want to enable the following lines. You probably # only need this if you really enjoy looking at the logs, you want to # produce some graphs of your system's timekeeping performance, or you # need help in debugging a problem. # # If you enable logging, you may want to add an entry to a log rotation # utility's configuration (e.g., newsyslog(8)). 'chronyc cyclelogs' # should be used to signal chronyd that a log file has been renamed. ! logdir /var/log/chrony ! log measurements statistics tracking # If you have real time clock support enabled (see below), you might want # this line instead: ! log measurements statistics tracking rtc ####################################################################### ### ACTING AS AN NTP SERVER # You might want the computer to be an NTP server for other computers. # # By default, chronyd does not allow any clients to access it. You need # to explicitly enable access using 'allow' and 'deny' directives. # # e.g. to enable client access from the 192.168.*.* class B subnet, ! allow 192.168/16 # .. but disallow the 192.168.100.* subnet of that, ! deny 192.168.100/24 # You can have as many allow and deny directives as you need. The order # is unimportant. # If you want to present your computer's time for others to synchronise # with, even if you don't seem to be synchronised to any NTP servers # yourself, enable the following line. The value 10 may be varied # between 1 and 15. You should avoid small values because you will look # like a real NTP server. The value 10 means that you appear to be 10 # NTP 'hops' away from an authoritative source (atomic clock, GPS # receiver, radio clock etc). ! local stratum 10 # Normally, chronyd will keep track of how many times each client # machine accesses it. The information can be accessed by the 'clients' # command of chronyc. You can disable this facility by uncommenting the # following line. This will save a bit of memory if you have many # clients and it will also disable support for the interleaved mode. ! noclientlog # The clientlog size is limited to 512KB by default. If you have many # clients, you might want to increase the limit. ! clientloglimit 4194304 # By default, chronyd tries to respond to all valid NTP requests from # allowed addresses. If you want to limit the response rate for NTP # clients that are sending requests too frequently, uncomment and edit # the following line. ! ratelimit interval 3 burst 8 ####################################################################### ### REPORTING BIG CLOCK CHANGES # Perhaps you want to know if chronyd suddenly detects any large error # in your computer's clock. This might indicate a fault or a problem # with the server(s) you are using, for example. # # The next option causes a message to be written to syslog when chronyd # has to correct an error above 0.5 seconds (you can use any amount you # like). ! logchange 0.5 # The next option will send email to the named person when chronyd has # to correct an error above 0.5 seconds. (If you need to send mail to # several people, you need to set up a mailing list or sendmail alias # for them and use the address of that.) ! mailonchange wibble@foo.example.net 0.5 ####################################################################### ### COMMAND ACCESS # The program chronyc is used to show the current operation of chronyd # and to change parts of its configuration whilst it is running. # By default chronyd binds to the loopback interface. Uncomment the # following lines to allow receiving command packets from remote hosts. ! bindcmdaddress 0.0.0.0 ! bindcmdaddress :: # Normally, chronyd will only allow connections from chronyc on the same # machine as itself. This is for security. If you have a subnet # 192.168.*.* and you want to be able to use chronyc from any machine on # it, you could uncomment the following line. (Edit this to your own # situation.) ! cmdallow 192.168/16 # You can add as many 'cmdallow' and 'cmddeny' lines as you like. The # syntax and meaning is the same as for 'allow' and 'deny', except that # 'cmdallow' and 'cmddeny' control access to the chronyd's command port. # Rate limiting can be enabled also for command packets. (Note, # commands from localhost are never limited.) ! cmdratelimit interval -4 burst 16 ####################################################################### ### HARDWARE TIMESTAMPING # On Linux, if the network interface controller and its driver support # hardware timestamping, it can significantly improve the accuracy of # synchronisation. It can be enabled on specified interfaces only, or it # can be enabled on all interfaces that support it. ! hwtimestamp eth0 ! hwtimestamp * ####################################################################### ### REAL TIME CLOCK # chronyd can characterise the system's real-time clock. This is the # clock that keeps running when the power is turned off, so that the # machine knows the approximate time when it boots again. The error at # a particular epoch and gain/loss rate can be written to a file and # used later by chronyd when it is started with the '-s' option. # # You need to have 'enhanced RTC support' compiled into your Linux # kernel. (Note, these options apply only to Linux.) ! rtcfile /var/db/chrony/rtc # Your RTC can be set to keep Universal Coordinated Time (UTC) or local # time. (Local time means UTC +/- the effect of your timezone.) If you # use UTC, chronyd will function correctly even if the computer is off # at the epoch when you enter or leave summer time (aka daylight saving # time). However, if you dual boot your system with Microsoft Windows, # that will work better if your RTC maintains local time. You take your # pick! ! rtconutc # By default chronyd assumes that the enhanced RTC device is accessed as # /dev/rtc. If it's accessed somewhere else on your system (e.g. you're # using devfs), uncomment and edit the following line. ! rtcdevice /dev/misc/rtc # Alternatively, if not using the -s option, this directive can be used # to enable a mode in which the RTC is periodically set to the system # time, with no tracking of its drift. ! rtcsync ####################################################################### ### REAL TIME SCHEDULER # This directive tells chronyd to use the real-time FIFO scheduler with the # specified priority (which must be between 0 and 100). This should result # in reduced latency. You don't need it unless you really have a requirement # for extreme clock stability. Works only on Linux. Note that the "-P" # command-line switch will override this. ! sched_priority 1 ####################################################################### ### LOCKING CHRONYD INTO RAM # This directive tells chronyd to use the mlockall() syscall to lock itself # into RAM so that it will never be paged out. This should result in reduced # latency. You don't need it unless you really have a requirement # for extreme clock stability. Works only on Linux. Note that the "-m" # command-line switch will also enable this feature. ! lock_all